banner
Home / Products / Spreader
Products
Enjue Marine Port Use mechanical Manual 10feet /20feet/40feet Container Lifting Spreader with BV CCS Cert.

Enjue Marine Port Use mechanical Manual 10feet /20feet/40feet Container Lifting Spreader with BV CCS Cert.

ENJUE Marine port use mechnical Manual 10feet /20feet/40feet Container lifting Spreader with BV CCS CERT. /Semi-Automati
Basic Info.
Model NO. 20FEET
Transport Package Nude Package or as Your Required
Specification 20ft or 40ft
Trademark China Enjue
Origin China
HS Code 843141000
Production Capacity 3000 Sets/Year
Product Description
ENJUE Marine port use mechnical Manual 10feet /20feet/40feet Container lifting Spreader with BV CCS CERT. /Semi-Automatic container spreader without power
Manual operated Container lifter Spreader with ISO BV CCS certificated Manufacturer
TypeSWLDead Weight
20feet Container spreader25-35T1.2-2.6T
40feet Container spreader32-45T3.0-3.2T
Automatic container spreader without power
The spreader is equipped on 40t gantry crane to load and unload containers. The spreader is light, no power, easy to operate and cheap. There are two kinds of spreader 32t-20' and 40t-40'.
Operation: first put the four main lifting ropes riggings of the spreaders and one turning stretch wire rope in the hook of the gantry crane. Before lifting, the guider points to open direction. By the localizers at the four sides of the spreader and the skilled operation, the four turning locks of spreader are locked into the corner, and then the hook is started slowly. The stretch wire rope is firstly tight to pull turning mechanism and turn the turning lock in 90°and be closed, and then keep lifting the hook .The container is lifted.
Lay container down: After hanging containers to be scheduled position, keep the hook fall about 1-2m and then lift the hook again. Before the main lifting wire rope is dragged, lift turning rope to make turning lock back to open position and lift the hook to depart the spreader and container .By now the operation is finished.
Maintenance: The link pole of the spreader and turning mechanism should be opened to check regularly and add lubricating oil to make every part turn fluently. If there are obvious damages and distortion, spreader and wire rope should stop work at once.